Server per il P2P con Debian: differenze tra le versioni

Vai alla navigazione Vai alla ricerca
Riga 56: Riga 56:
=====.rtorrent.rc=====
=====.rtorrent.rc=====
(modifiche principali in <font style="color:red;">rosso</font>)
(modifiche principali in <font style="color:red;">rosso</font>)
<pre style="overflow:auto;max-height:400px">
<div style="overflow:auto;max-height:400px">
# This is an example resource file for rTorrent. Copy to
&&#35; This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
&&#35; ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
&&#35; uncomment the options you wish to enable.


# Maximum and minimum number of peers to connect to per torrent.
&&#35; Maximum and minimum number of peers to connect to per torrent.
<font style="color:red;">min_peers = 40
<font style="color:red;">min_peers = 40
max_peers = 100</font>
max_peers = 100</font>


# Same as above but for seeding completed torrents (-1 = same as downloading)
&&#35; Same as above but for seeding completed torrents (-1 = same as downloading)
<font style="color:red;">min_peers_seed = 5
<font style="color:red;">min_peers_seed = 5
max_peers_seed = 10</font>
max_peers_seed = 10</font>


# Maximum number of simultanious uploads per torrent.
&&#35; Maximum number of simultanious uploads per torrent.
<font style="color:red;">max_uploads = 5</font>
<font style="color:red;">max_uploads = 5</font>


# Global upload and download rate in KiB. "0" for unlimited.
&&#35; Global upload and download rate in KiB. "0" for unlimited.
<font style="color:red;">download_rate = 75
<font style="color:red;">download_rate = 75
upload_rate = 5</font>
upload_rate = 5</font>


# Default directory to save the downloaded torrents.
&&#35; Default directory to save the downloaded torrents.
#directory = ./complete
&&#35;directory = ./complete
<font style="color:red;">directory = /home/mulo/torrent/complete</font>
<font style="color:red;">directory = /home/mulo/torrent/complete</font>


# Default session directory. Make sure you don't run multiple instance
&&#35; Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
&&#35; of rtorrent using the same session directory. Perhaps using a
# relative path?
&&#35; relative path?
session = /home/mulo/session
session = /home/mulo/session


# Watch a directory for new torrents, and stop those that have been
&&#35; Watch a directory for new torrents, and stop those that have been
# deleted.
&&#35; deleted.
schedule = watch_directory,10,10,load_start=/home/mulo/watch/*.torrent
schedule = watch_directory,10,10,load_start=/home/mulo/watch/*.torrent
schedule = tied_directory,10,10,start_tied=
schedule = tied_directory,10,10,start_tied=
schedule = untied_directory,10,10,close_untied=
schedule = untied_directory,10,10,close_untied=
# */
&&#35; */
# Close torrents when diskspace is low.
&&#35; Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
&&#35;schedule = low_diskspace,5,60,close_low_diskspace=100M


# Stop torrents when reaching upload ratio in percent,
&&#35; Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
&&#35; when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
&&#35; reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
&&#35; example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
schedule = ratio,60,60,"stop_on_ratio=250,250M,2500"
schedule = ratio,60,60,"stop_on_ratio=250,250M,2500"
# Move completed torrents
&&#35; Move completed torrents
system.method.set_key = event.download.finished,move_complete,"execute=mv,-u,$d.get_base_path=,/home/mulo/complete;d.set_directory=/home/mulo/complete"
system.method.set_key = event.download.finished,move_complete,"execute=mv,-u,$d.get_base_path=,/home/mulo/complete;d.set_directory=/home/mulo/complete"


# The ip address reported to the tracker.
&&#35; The ip address reported to the tracker.
#ip = 127.0.0.1
&&#35;ip = 127.0.0.1
#ip = rakshasa.no
&&#35;ip = rakshasa.no


# The ip address the listening socket and outgoing connections is
&&#35; The ip address the listening socket and outgoing connections is
# bound to.
&&#35; bound to.
#bind = 127.0.0.1
&&#35;bind = 127.0.0.1
#bind = rakshasa.no
&&#35;bind = rakshasa.no


# Port range to use for listening.
&&#35; Port range to use for listening.
port_range = 6881-6999
port_range = 6881-6999


# Start opening ports at a random position within the port range.
&&#35; Start opening ports at a random position within the port range.
#port_random = no
&&#35;port_random = no


# Check hash for finished torrents. Might be usefull until the bug is
&&#35; Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
&&#35; fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
&&#35;check_hash = no
check_hash = yes
check_hash = yes


# Set whetever the client should try to connect to UDP trackers.
&&#35; Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
use_udp_trackers = yes


# Alternative calls to bind and ip that should handle dynamic ip's.
&&#35; Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
&&#35;schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
&&#35;schedule = bind_tick,0,1800,bind=rakshasa


# Encryption options, set to none (default) or any combination of the following:
&&#35; Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
&&#35; allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
&&#35;
# The example value allows incoming encrypted connections, starts unencrypted
&&#35; The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
&&#35; outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
&&#35; plaintext to RC4 encryption after the encrypted handshake
#
&&#35;
# encryption = allow_incoming,enable_retry,prefer_plaintext
&&#35; encryption = allow_incoming,enable_retry,prefer_plaintext
encryption = allow_incoming,try_outgoing,enable_retry
encryption = allow_incoming,try_outgoing,enable_retry


# Enable DHT support for trackerless torrents or when all trackers are down.
&&#35; Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
&&#35; May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
&&#35; "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
&&#35; The default is "off". For DHT to work, a session directory must be defined.
#  
&&#35;
dht = auto
dht = auto


# UDP port to use for DHT.  
&&#35; UDP port to use for DHT.  
#  
&&#35;
dht_port = 6881
dht_port = 6881


# Enable peer exchange (for torrents not marked private)
&&#35; Enable peer exchange (for torrents not marked private)
#
&&#35;
peer_exchange = yes
peer_exchange = yes


#
&&#35;
# Do not modify the following parameters unless you know what you're doing.
&&#35; Do not modify the following parameters unless you know what you're doing.
#
&&#35;


# Hash read-ahead controls how many MB to request the kernel to read
&&#35; Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
&&#35; ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
&&#35; while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
&&#35; pages in memory thus end up trashing.
#hash_read_ahead = 10
&&#35;hash_read_ahead = 10


# Interval between attempts to check the hash, in milliseconds.
&&#35; Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
&&#35;hash_interval = 100


# Number of attempts to check the hash while using the mincore status,
&&#35; Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
&&#35; before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
&&#35; decent hash checking rate.
#hash_max_tries = 10
&&#35;hash_max_tries = 10


# This will set rtorrent/scgi to listen on localhost, port 5000
&&#35; This will set rtorrent/scgi to listen on localhost, port 5000
scgi_port = localhost:5000
scgi_port = localhost:5000
# Force rtorrent to use the UTF-8 encoding. The XMLRPC standard requires UTF-8 replies
&&#35; Force rtorrent to use the UTF-8 encoding. The XMLRPC standard requires UTF-8 replies
encoding_list=UTF-8
encoding_list=UTF-8
</pre>
</div>


La maggior parte di queste opzioni sono esplicite, altre un po' ermetiche; è possibile consultare il [http://libtorrent.rakshasa.no/rtorrent/rtorrent.1.html manuale] per avere maggiori informazioni.
La maggior parte di queste opzioni sono esplicite, altre un po' ermetiche; è possibile consultare il [http://libtorrent.rakshasa.no/rtorrent/rtorrent.1.html manuale] per avere maggiori informazioni.
909

contributi

Menu di navigazione