Guide@Debianizzati.Org

I repository ed il loro utilizzo: differenze tra le versioni

Pagina Discussione

I repository ed il loro utilizzo (visualizza wikitesto)

Versione delle 08:56, 30 mag 2006

4 byte aggiunti ,  30 mag 2006
m
→‎Introduzione
m (→‎Introduzione: link a faq)
Riga 1: Riga 1:
Questa configurazione del kernel è stata testata con successo con kernel della serie 2.6.16.
==Debian==


<pre>#
===Installazione===
# Automatically generated make config: don't edit
==== � possibile installare, con apt-get, anche i pacchetti indicati come 'suggeriti' e/o 'raccomandati'?====
# Linux kernel version: 2.6.16
Apt-get non offre ancora questa opzione, ma sono presenti due soluzioni:
# Sat May 27 11:27:35 2006
* installare aptitude ed utilizzarlo al posto di apt:<pre># aptitude install nomepacchetti</pre>
#
* uno script che fa quanto richiesto appoggiandosi ad apt-get: <br/>'''aag''' - advanced-apt-get apt-get install with support for recommends and suggested - http://www.formorer.de/code/aag/
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y


#
===Release===
# Code maturity level options
==== A cosa servono le release successive di una versione Stable di Debian (ad esempio Woody 3.0r4 o r6...)?====
#
Le varie release successive di una Debian Stable sono dovute a degli aggiornamenti di sicurezza, bugfix, rimozione di pacchetti non pi� usabili, ...
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32


#
Ecco alcuni esempi:
# General setup
Woody 3.0R3
#
Woody 3.0r4
CONFIG_LOCALVERSION="-keltik"
Woody 3.0r5
CONFIG_LOCALVERSION_AUTO=y
Woody 3.0r6
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set


#
===Repository===
# Loadable module support
==== Cos'� un repository?====
#
Un repository � un archivio di pacchetti .deb (quelli tipici Debian), che presenta una sruttura ben definita, molto simile a quella che si trova all'interno di uno dei CD di installazione.
CONFIG_MODULES=y
I pacchetti contenuti in un repository sono indicizzati in questi file:
CONFIG_MODULE_UNLOAD=y
* '''Packages.gz''' (se sono pacchetti contenenti binari)
# CONFIG_MODULE_FORCE_UNLOAD is not set
* '''Sources.gz''' (se sono pacchetti contenenti codice sorgente)
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y


#
Il comando
# Block layer
<pre>
#
# apt-get update
# CONFIG_LBD is not set
</pre>
non fa altro che scaricare uno di questi file (a seconda che si sia scelto di avere la lista dei pacchetti binari o quella dei pacchetti sorgente) per ogni riga non commentata presente nel file <tt>/etc/apt/sources.list</tt>, cos� da avere disponibile sul proprio computer un elenco dei pacchetti contenuti nel repository indicato in quella riga.
Per approfondimenti vedere la sezione del wiki: [[Indice_Guide#Gestione_dei_Pacchetti | Gestione dei Pacchetti]].


#
E' dunque consigliabile avere nel proprio <tt>/etc/apt/sources.list</tt> diversi repository, in quanto potrebbero contenere pacchetti diversi.
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"


#
Una lista completa dei repository ufficiali pu� essere trovata sul sito ufficiale Debian: http://www.debian.org/mirror/mirrors_full.
# Processor type and features
Diversamente esistono in internet moltissimi repository non ufficiali per le pi� disparate esigenze. Un punto di partenza per cercare repository non ufficiali potrebbe essere http://www.apt-get.org
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set


#
====Come mai per Testing e Unstable non ci sono pi� i repository non-US?====
# Firmware Drivers
Come si pu� leggere in [http://lists.debian.org/debian-release/2005/05/msg01163.html questa email] apparsa il 18 maggio su debian-release, il ramo non-US � stato assimilato a quello principale, non essendoci pi� le motivazioni necessarie per l'esistenza di questa sezione.
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_DOUBLEFAULT=y


#
===Security===
# Power management options (ACPI, APM)
==== Come arrivano in testing gli aggiornamenti di sicurezza?====
#
Gli aggiornamenti di sicurezza giungono nella distribuzione testing tramite unstable. Essi sono solitamente inviati con una priorit� impostata ad high, il che ridurr� il loro tempo di quarantena a due giorni. Dopo questo periodo, i pacchetti migreranno in testing automaticamente, se compilati per tutte le architetture e con tutte le dipendendenze soddisfatte in testing.
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"
# CONFIG_SWSUSP_ENCRYPT is not set


#
==== Come � gestita la sicurezza per contrib e non-free?====
# ACPI (Advanced Configuration and Power Interface) Support
La risposta breve �: non lo �. Contrib e non-free non sono parti ufficiali della distribuzione Debian e per questo non sono supportate dal team sicurezza. Alcuni pacchetti non-free sono distribuiti senza sorgenti o senza una licenza che permetta la distribuzione di versioni modificate. E in quei casi sono completamente impossibili i fix di sicurezza. Se c'� la possibilit� di risolvere il problema e il manutentore del pacchetto o qualcun altro fornisce un pacchetto correttamente aggiornato, allora di solito il team sicurezza lo processa e rilascia un advisory.
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set


#
====Per quanto tempo sono assicurati gli aggiornamenti di sicurezza?====
# APM (Advanced Power Management) BIOS Support
Il team sicurezza cerca di supportare una distribuzione stable per circa un anno dal rilascio della successiva distribuzione stable, a meno che un'ulteriore distribuzione stable sia rilasciata nell'anno stesso. Non � possibile supportare tre distribuzioni; supportarne due contemporaneamente � gi� abbastanza difficile.
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y


#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m


#
==Java==
# CPUFreq processor drivers
=== Come posso installare Java su Debian, senza 'sporcare' il sistema? ===
#
Le soluzioni sono due:
# CONFIG_X86_ACPI_CPUFREQ is not set
* scaricarlo da un repository non ufficiale
# CONFIG_X86_POWERNOW_K6 is not set
* Crearsi da soli il pacchetto seguendo [[Make-jpkg:_Pacchettiziamo_Java_Sun | Questa Guida]]
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set


#
=== Come mai non � presente, in Debian, il Java di Sun? ===
# shared options
Debian, come spesso ricordato, fornisce una Distribuzione Linux 100% FreeSoftware. Quindi Java (quello di Sun) non pu� venir incluso, visto che non � assolutamente considerabile FreeSoftware.
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set


#
Vengono, quindi, inclusi dei 'cloni' o, meglio, delle nuove implementazioni del linguaggio (kaffe, ad esempio).
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set


#
=== Come posso risolvere i problemi di dipendenze legati ai pacchetti dei programmi scritti in Java? ===
# PCCARD (PCMCIA/CardBus) support
L'unico modo per risolvere questi 'fastidiosi' problemi � installare Java in formato .deb. Per fare questo ci sono due strade:
#
* pacchettizzarlo da soli (tramite il comodo tool java-package, una guida � reperibile [[Make-jpkg:_Pacchettiziamo_Java_Sun | Qui]])
CONFIG_PCCARD=m
* scaricandolo direttamente da un repository contenente Java.
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y


#
=== Come posso abilitare il supporto a Java in Firefox? ===
# PC-card bridges
Partiamo dal presupporto che java sia stato installato [[Make-jpkg:_Pacchettiziamo_Java_Sun | seguendo questo metodo]].
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m


#
Localizziamo il file ''libjavaplugin_oji.so'' tramite il comando
# PCI Hotplug Support
<pre>
#
# dpkg -L sun-j2re1.5 | grep libjavaplugin_oji.so
# CONFIG_HOTPLUG_PCI is not set
</pre>
(ovviamente sun-j2re2.5 rappresenta il pacchetto che � stato creato tramite il processo descritto nella guida alla pacchettizzazione di Java)


#
Una volta individuato, � sufficiente creare un link simbolico:
# Executable file formats
<pre>
#
# ln -s /usr/lib/j2re1.5-sun/plugin/i386/ns7/libjavaplugin_oji.so /usr/lib/mozilla-firefox/plugins/
CONFIG_BINFMT_ELF=y
</pre>
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y


#
# Networking
#
CONFIG_NET=y


#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set


#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set


#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set


#
==Kernel==
# TIPC Configuration (EXPERIMENTAL)
==== Si pu� aggiornare il kernel a una versione successiva senza doverlo ricompilare? ====
#
Certamente!
# CONFIG_TIPC is not set
con il comando
# CONFIG_ATM is not set
<pre>
# CONFIG_BRIDGE is not set
# apt-cache search kernel-image
# CONFIG_VLAN_8021Q is not set
</pre>
# CONFIG_DECNET is not set
si ottiene una lista dei kernel precompilati disponibili per il download.
# CONFIG_LLC2 is not set
Una volta individuata la versione voluta, � necessario scegliere quello adatto per il proprio processore (in caso di incertezze, scegliere quello generico i386) ed installarlo come se si trattasse di un normale pacchetto:
# CONFIG_IPX is not set
<pre>
# CONFIG_ATALK is not set
# apt-get install kernel-image.....
# CONFIG_X25 is not set
</pre>
# CONFIG_LAPB is not set
Per installare il kernel dalla versione 2.6.12 in poi, bisogna cercare i pacchetti che iniziano con linux-image anzich� kernel-image.
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set


#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set


#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set


#
# Device Drivers
#


#
==Linux==
# Generic Driver Options
=== Audio ===
#
==== Il volume � al minimo a ogni riavvio. Come salvo le impostazioni? ====
CONFIG_STANDALONE=y
Per configurare la scheda audio si usa il comando alsaconf:
CONFIG_PREVENT_FIRMWARE_BUILD=y
<pre>
CONFIG_FW_LOADER=y
# alsaconf
</pre>
Se il comando non viene trovato, significa che dobbiamo installare le alsa-utils:
<pre>
# aptitude install alsa-utils
</pre>
Il tool alsaconf rileva automaticamente la scheda audio e imposta il sistema per il suo utilizzo. Se al riavvio le impostazioni del volume vengono sempre riportate al minimo, dobbiamo forzare il salvataggio delle impostazioni:
<pre>
# alsaconf
# alsamixer
# alsactl store
</pre>
con alsamixer impostiamo i livelli del volume, con 'alsactl store' salviamo le impostazioni.


#
=== Mount/Filesystem ===
# Connector - unified userspace <-> kernelspace linker
==== Come posso fare in modo che, indicando 'auto' come filesystem al comando 'mount' venga provato prima 'vfat' che 'msdos'? ====
#
# CONFIG_CONNECTOR is not set


#
� sufficiente creare un file '''/etc/filesystems''' dal quale, il comando mount, legger� i filesystem da provare e l'ordine con cui farlo...
# Memory Technology Devices (MTD)
In /proc, inoltre, � gi� presente quel file (che viene usato in mancanza di /etc/filesystems).
#
# CONFIG_MTD is not set


#
Per fare tutto questo:
# Parallel port support
#
# CONFIG_PARPORT is not set


#
<pre>
# Plug and Play support
# cp /proc/filesystems /etc
#
# vi /etc/filesystems
CONFIG_PNP=y
</pre>
# CONFIG_PNP_DEBUG is not set


#
ed invertire le righe contenenti 'msdos' e 'vfat'.
# Protocols
Se si vuole togliere un determinato filesystem dalla prova, � sufficiente apporre la parola 'nodev'.
#
CONFIG_PNPACPI=y


#
=== Shell ===
# Block devices
==== Perch�, se aggiungo il mio utente ad un gruppo, le applicazioni non sembrano risentire della modifica? ====
#
Per 'applicare' il cambiamento effettuato alla lista dei gruppi in cui un utente e' inserito e' necessario effettuare una operazione di '''logout - login''', per consentire il ricaricamento della lista.
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set


#
==== Come posso modificare i 'locales'? ====
# ATA/ATAPI/MFM/RLL support
La localizzazione � modificabile col comando
#
<pre>
CONFIG_IDE=y
# dpkg-reconfigure locales
CONFIG_BLK_DEV_IDE=y
</pre>
Se si vogliono maggiori opzioni (ed una configurazione un po' pi� dettagliata) � possibile utilizzare localeconf
<pre>
# apt-get install localeconf
</pre>


#
=== Varie ===
# Please see Documentation/ide.txt for help/info on IDE drives
==== Che cosa esprime il comando uptime? ====
#
Il comando Uptime, di cui viene riportato un classico output
# CONFIG_BLK_DEV_IDE_SATA is not set
<pre>
# CONFIG_BLK_DEV_HD_IDE is not set
$ uptime
CONFIG_BLK_DEV_IDEDISK=y
23:02:23 up 23 days, 23:25,  1 user,  load average: 0.57, 0.57, 0.83
CONFIG_IDEDISK_MULTI_MODE=y
</pre>
# CONFIG_BLK_DEV_IDECS is not set
rappresenta (nell'ordine):
CONFIG_BLK_DEV_IDECD=y
* Ora attuale (23:02:23)
# CONFIG_BLK_DEV_IDETAPE is not set
* Per quanto la macchina � stata accesa (up 23 days, 23:25); cio� il tempo passato dall'avvio o dall'ultimo reboot della macchina espresso in giorni, ore, minuti.
# CONFIG_BLK_DEV_IDEFLOPPY is not set
* Il numero di utenti connessi (1 user)
CONFIG_BLK_DEV_IDESCSI=m
* Il carico della Macchina (load average: 0.57, 0.57, 0.83)
# CONFIG_IDE_TASK_IOCTL is not set


#
Il carico della macchina rappresenta i punti di carico degli ultimi 1, 5, 15 minuti
# IDE chipset support/bugfixes
Riporto una breve descrizione, tratta dal [http://autistici.org/loa/web/main.html Corso di Linux di LOA Hacklab MI ](reperibile nella sezione Docs del loro sito).
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set


#
<blockquote>Un punto di carico equivale a dire che la CPU ha lavoro a su?cienza per riempire il suo naturale ciclo di calcolo della durata di un secondo. Per dirla in altro modo, nell�arco di un secondo la CPU non ha tempo di eseguire un NOP, ossia un�istruzione vuota, che non fa nulla, che viene abitualmente "eseguita� nelle pause di elaborazione.</blockquote>
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y


#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set


#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set


#
== X ==
# SCSI Transport Attributes
=== Generale ===
#
==== Come posso modificare il login manager di default? ====
# CONFIG_SCSI_SPI_ATTRS is not set
Per cambiare il proprio login manager di default, � necessario prima installare quello sostituivo.
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set


#
Facciamo un esempio con '''kdm''' (installato) e '''gdm''' (da installare).
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set


#
1) Installiamo il nuovo Login Manager
# PCMCIA SCSI adapter support
<pre>
#
# apt-get install gdm
# CONFIG_PCMCIA_AHA152X is not set
</pre>
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set


#
2) Durante l'installazione verr� chiesto quale Login Manager settare come default. Scegliamo quello nuovo.
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set


#
Nel caso si fosse gi� scaricato il login manager, � necessario eseguire:
# Fusion MPT device support
<pre>
#
# dpkg-reconfigure gdm
# CONFIG_FUSION is not set
</pre>
# CONFIG_FUSION_SPI is not set
(ovviamente sostituendo a gdm il nome del pacchetto del login manager)
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set


#
Questo comando far� apparire la stessa finestra apparsa durante l'installazione con apt-get. Da qui � possibile scegliere il login manager di default.
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m


#
==== Come posso riconfigurare il server X? ====
# Subsystem Options
Debian offre un comodo comando per fare questo:
#
<pre>
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# dpkg-reconfigure xserver-xfree86
# CONFIG_IEEE1394_OUI_DB is not set
</pre>
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
Cos� facendo, si acceder� alla stessa procedura guidata che viene mostrata durante l'installazione del pacchetto.
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set


#
Altrimenti sono sempre disponibili i comandi standard:
# Device Drivers
<pre>
#
# xf86config
</pre>
per una configurazione testuale


#
<pre>
# Texas Instruments PCILynx requires I2C
# xf86cfg
#
</pre>
CONFIG_IEEE1394_OHCI1394=m
per una configurazione grafica con l'autorilevamento dell'hardware


#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m


#
====Aggiungere il supporto per la rotella del mouse====
# I2O device support
Modificare il file /etc/X11/XF86Config (o /etc/X11/XF86Config-4 o /etc/X11/xorg.conf), nella sezione riguardante il mouse...
#
# CONFIG_I2O is not set


#
Pre prima cosa bisogna modificare il driver del mouse, che deve diventare:<pre>
# Network device support
Option "Driver" "imPS/2"</pre>
#
questo permette di avere un driver supportante la rotella ;-)
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set


#
Per attivarla, si aggiunga nella sezione del mouse la seguente riga:
# ARCnet devices
<pre>
#
Option "ZAxisMapping" "4 5"</pre>
# CONFIG_ARCNET is not set


#
=== kde ===
# PHY device support
==== Come mai non riesco ad avviare kppp anche se � installato? ====
#
Kppp, accedendo ad una componente 'critica' come una porta seriale, per poter essere eseguito da un utente normale, richiede che questo utente appartenga a due gruppi: '''dialout''' e '''dip'''.
# CONFIG_PHYLIB is not set
Per fare cio' e' sufficiente usare i seguenti comandi:
<pre>
# adduser nomeutente dip
# adduser nomeutente dialout
</pre>
ed effettuare un ''logout - login'' per l'aggiornamento dei permessi.


#
==== Come posso abilitare in Kmail il supporto per le firme S/MIME? ====
# Ethernet (10 or 100Mbit)
dal 17 Marzo � sufficiente un normale:
#
<pre>
CONFIG_NET_ETHERNET=y
# apt-get install gpgsm gnupg-agent
CONFIG_MII=m
</pre>
# CONFIG_HAPPYMEAL is not set
(presenti anche in sarge)
# CONFIG_SUNGEM is not set
cos�, inoltre, funzioner� anche il programma kleopatra
# CONFIG_CASSINI is not set
([http://lists.debian.org/debian-kde/2005/03/msg00134.html Link alla News])
# CONFIG_NET_VENDOR_3COM is not set


#
==== L'avvio di kdm risulta essere lento, come fare per sistemarlo? ====
# Tulip family network device support
Normalmente sembra essere un fatto legato alla cache dei fonts...
#
con un
# CONFIG_NET_TULIP is not set
<pre>
# CONFIG_HP100 is not set
# fc-cache
CONFIG_NET_PCI=y
</pre>
# CONFIG_PCNET32 is not set
dovrebbe tornare tutto a posto
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set


#
==== Come posso avere pi� display utilizzabili contemporaneamente? ====
# Ethernet (1000 Mbit)
Per display si intendono le 'sessioni di X eseguite in contemporanea'!
#
In pratica, si pu� configurare kdm in modo da rendere possibile l'avvio di pi� sessioni grafiche (utili nel caso in cui pi� utenti lavorino sulla stessa macchina, ed uno di questi non possa chiudere la propria sessione).
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set


#
� sufficiente modificare il file
# Ethernet (10000 Mbit)
'''/etc/kde3/kdm/Xservers'''
#
Decommentando una (o pi�) delle righe:
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set


#
<pre>
# Token Ring devices
:1 local@tty2 reserve /usr/X11R6/bin/X -nolisten tcp :1
#
:2 local@tty3 reserve /usr/X11R6/bin/X -nolisten tcp :2
# CONFIG_TR is not set
:3 local@tty4 reserve /usr/X11R6/bin/X -nolisten tcp :3
:4 local@tty5 reserve /usr/X11R6/bin/X -nolisten tcp :4
</pre>


#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y


#
Apparir�, dopo il riavvio di X, un pulsante che permette l'avvio di una nuova sessione grafica!
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
 
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
 
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
 
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
 
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
 
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
 
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
 
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
 
#
# Telephony Support
#
# CONFIG_PHONE is not set
 
#
# Input device support
#
CONFIG_INPUT=y
 
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
 
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
 
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
 
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
 
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
 
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
 
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
 
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
 
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
 
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
 
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
 
#
# I2C support
#
# CONFIG_I2C is not set
 
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
 
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
 
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
 
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
 
#
# Multimedia Capabilities Port drivers
#
 
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
 
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
 
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
 
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
 
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
#
# Sound
#
CONFIG_SOUND=y
 
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
 
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
 
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
 
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
 
#
# PCMCIA devices
#
 
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
 
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
 
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
 
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
 
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
 
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
 
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
 
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
 
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
 
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
 
#
# USB Multimedia devices
#
 
#
# Video4Linux support is needed for USB Multimedia device support
#
 
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
 
#
# USB port drivers
#
 
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
 
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
 
#
# USB DSL modem support
#
 
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
 
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
 
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
 
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
 
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
 
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
 
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
 
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
 
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
 
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
 
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
 
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
 
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
 
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
 
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
 
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
 
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
 
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y</pre>
 
[[Categoria:Kernel]]
TheNoise
1 760

contributi

Estratto da "https://guide.debianizzati.org/index.php/Speciale:DiffMobile/13458"